CRE-FC 2050÷4190

Home Montair Products Aircooled liquid Chillers Aircooled liquid Chillers Free-Cooling CRE-FC 2050÷4190
CRE-FC 2050÷4190
free cooling.png

CRE-FC 2050÷4190

Aircooled liquid Chillers Free-Cooling with axial fans, Scroll compressors and plate exchanger

_montair_icon_cooling_only.png _montair_Scroll_2015.png _montair_icon_Axial_fans_2015.png _montair_icon_plate_2015.png _montair_FC_2015.png _montair_icon_refrigerant_R410A_14.png _montair_icon_refrigerant_R452B.png icon_refrigerant_R454B.png

The liquid Chillers of the CRE-FC 2050÷4190 series, with R410A refrigerant and Free-Cooling technology, are specifically designed to maximize the energy efficiency on cooling of medium size data centres.
During the cold months, in the FREE-COOLING operation mode, the return liquid of the system is cooled directly by forced convection of outdoor air through the condensing coil, thus saving energy by not operating the unit's Scroll compressors. A 3-way valve system is controlled by the electronic microprocessor controller, allowing functioning in CHILLER, FREE-COOLING or MIXED (simultaneously CHILLER and FREE-COOLING) modes.
Equipped with axial fans, Scroll compressors and plate exchanger, these units can be completed by a hydraulic circuit with tank, with pump, or with tank and pump. A wide range of accessories, factory fitted or supplied separately, complete the outstanding versatility and functionality of the series.
Units are featured as standard with an electronic proportional device that ensures efficient continuous functioning of the unit with outside air temperature down to –20 °C.

Versions

  • CRE-FC - Cooling only

Features

  • Structure with supporting frame, made of galvanised sheet metal with additional protection provided by polyester powder coating.
  • Scroll compressors with oil sight glass, internal overheat protection and crankcase heater.
  • Axial fans directly coupled to an electric motor with external rotor.
  • Condenser made of copper tubes and aluminium finned coil combined with FREE-COOLING coil.
  • Evaporator AISI 316 stainless steel braze welded plates type with one circuit on the refrigerant side and one on the water side in 2050÷3135 models; with two independent circuits on the refrigerant side and one on the water side in 4150÷4190 models, complete with water differential pressure switch.
  • Electronic high and low pressure gauges.
  • R410A refrigerant.
  • Electrical board includes: main switch with door safety interlock, fuses, thermal protection relays for compressors and thermocontacts for fans.
  • Condensing Control is included: electronic proportional device that ensures efficient and continuous functioning of the unit with outside air temperature down to –20 °C. It also allows to reduce the sound level especially at night. It consists of a fans speed controller with continuous speed regulation, high and low pressure transducers on cooling circuit and an electrical heater on electrical board.
  • Microprocessor control and regulation system.

Factory fitted accessories

  • IM Automatic circuit breakers
  • SL Unit silencement
  • TE Electronic expansion valve
  • RFM Cooling circuit shut-off valve on discharge line
  • RFL Cooling circuit shut-off valve on liquid line
  • EC EC Inverter fans
  • ECH EC Inverter fans with high available static pressure
  • TX Coil with pre-coated fins
  • SI Inertial tank
  • PS Single circulating pump
  • PD Double circulating pump
  • SS Soft start
  • IS Modbus RTU protocol, RS485 serial interface
  • IST Modbus TCP/IP protocol, Ethernet port
  • ISB BACnet MSTP protocol, RS485 serial interface
  • ISBT BACnet TCP/IP protocol, Ethernet port
  • ISL LonWorks protocol, FTT-10 serial interface
  • ISS SNMP protocol, Ethernet port

Loose accessories

  • MN High and low pressure gauges
  • CR Remote control panel
  • RP Coils protection metallic guards
  • AG Rubber shock absorbers
  • AM Spring shock absorbers