XIP 1017÷3136

Home Montair Products Direct expansion Close Control units with full Inverter technology AIR COOLED DIRECT EXPANSION UNITS XIP 1017÷3136
XIP 1017÷3136
_icone_montair_tecnologie_aircooled_dx.png

_montair_tech_inverter_compressor.png

_montair_tech_ec_inverter_plug_fan.png

XIP 1017÷3136

Aircooled direct expansion units with Inverter Scroll compressors and EC Inverter Plug-Fans

_montair_DX_2015.png _montair_Scroll_inverter_2015.png _montair_EC_plug_fan_inverter_2015.png _montair_EC_plug_fan_inverter_HIGH_ESP2015.png _montair_icon_refrigerant_R410A_14.png

High efficiency aircooled direct expansion units. The Inverter Scroll compressor and the EC Inverter Plug-Fans vary their delivered power and absorbed power depending on the real requested thermal load. Up to 88% difference between minimum and maximum absorbed power is reachable.
The XIP range is equipped with EC Inverter Plug-Fans; High Head fans are available as accessories.
The range features electronic expansion valve already included.
The XIP range is available in two air discharge versions: XIPT with top air discharge and XIPB with bottom air discharge.
Unit supervision is developed by means of Modbus RTU protocol over RS485
serial interface as standard configuration. Other communication protocols and
interfaces are available as option.
The units are suitable for operation at a high outdoor air temperature (up to 52 C) with the correct combination with the XT remote condensers.

Versions

  • XIPT/C - Top air discharge and frontal intake
  • XIPT/U - Top air discharge and frontal intake
  • XIPT/E - Top air discharge and frontal intake
  • XIPT/D - Top air discharge and frontal intake
  • XIPB/C - Bottom air discharge and upper intake
  • XIPB/U - Bottom air discharge and upper intake
  • XIPB/E - Bottom air discharge and upper intake
  • XIPB/D - Bottom air discharge and upper intake

Power range

  • 17,0-136 kW

Factory fitted accessories

  • AP High ESP fans
  • SL Unit silencement
  • AR Air renewal inlet with filter
  • AT Constant air flow regulation control
  • AT/P Constant available static pressure regulation control
  • PF Differential pressure switch filters control
  • ES Electrical heater with step regulation
  • WS2 Hot water coil with 3-Way valve
  • PG Hot gas post-heating coil (with valve)
  • UMI Electrodes steam humidifier
  • SA Water alarm sensor
  • IST Modbus TCP/IP protocol, Ethernet port
  • ISB BACnet MSTP protocol, RS485 serial interface
  • ISBT BACnet IP protocol, Ethernet port
  • ISS SNMP protocol, Ethernet port
  • LT Unit ready for operation with KLT
  • RE Adjustable minimum/maximum voltage and phase control relay

Loose accessories

  • MP Condensate drain pump
  • MP/U Condensate and humidifier drain pump
  • SB Fire sensor
  • SC Smoke sensor
  • CR Remote control panel
  • ZP Adjustable baseframe with shock absorbers (mod. B only)
  • ZA Adjustable baseframe with shock absorbers and deflector (mod. B only)
  • DL Bottom plenum for side connections (mod. T only)
  • BA Top vertical intake plenum with F7 efficiency filter (mod. B only)
  • BD Top frontal discharge plenum with grid (mod. T only)
  • DM Bottom frontal discharge plenum with grid (mod. B only)
  • BV Top discharge/intake plenum with damper